Competitive Price for Y Connector For Solar Panel - Professional manufacturing 1000V MC4 connector – Boneng

Technical data

Application

Used for photovoltaic systems

Solution

Installation or maintenance should be operated by the professional personnel.
● For protection against electric shock, while being assembled or disassembled, make sure connectors isolated from the power supply.
● Don’t connected or disconnected under load.
● During the assembly process, keep the connector away from any corrosive materials.

Installation Instruction

1.Get a junction box and its base by a clean soft cloth with alcohol.
2.Panel back-sheet Upon, dry, no oil and other dirty. Clean the back-sheet area by a
clean soft cloth with alcohol.
3.Stroke straight the rubber by a pincers,keep vertical against the back-sheet.
4.Get a bottle silicon, cut the mouth of the bottle, making sure the diameter is 4mm, insert it into the air gun, screw cover, no cut on mouth of the air gun.
5.Put the junction box on working desk, get the air gun and keep vertical against the junction box base, gluing around the junction box base edge circle.
6.Get the rubber through the junction box base hole, press hardly the junction box on the back-sheet till the silicon overflow around.
7.Place panels across in the air currents 10 hours till the silicon cures.
8.Check the reliability of each terminal connection, and press the raised bus bar on the connection terminal by hand.
9.Cover the junction box with a click sound, the should not be pick out by hands.

FAQ